If you are anywhere between Main Street and the US-29 corridor, or out toward the Flomaton depot, we cover it, along with the rest of Escambia County.
The mix of housing here matters for door work. Older Flomaton homes have wood frames and hardware worth repairing rather than replacing, while newer construction tends to have vinyl and aluminum systems where the moving parts wear out long before anything else does.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895What Flomaton customers call us about
These are the storefront door repair faults we are called out to most often in Flomaton. If you recognise one, the underlying cause is usually the second half of the line.
- The door will not close the last few inchesCloser latch speed misadjusted or a failed closer spring.
- Water blowing under the door during stormsFailed sweep and threshold seal.
- The bottom rail is loose or has separatedThe rail-to-glass connection has failed, which is common on older entrances.
- The push bar or pull handle is looseFasteners working out of the aluminum stile.
- The deadlatch catches but the door can be shimmied openA worn auxiliary latch that is no longer deadlocking the main bolt.
- The closer leaks oil or has stopped closing the doorFailed concealed overhead or floor closer.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895How conditions in Flomaton affect storefront door repair
Blowing sand gets into everything down here. Tracks, screen channels, thresholds and lock cylinders all collect it, and it acts like sandpaper on moving parts.
Grit accumulates in the bottom pivot and the threshold of an aluminum entrance and grinds the bearing surface, and on a storefront that sees hundreds of cycles a day that wear happens quickly.
A gust catching a storefront door with no overhead stop drives it past its limit and destroys the closer arm, and repeated wind loading is what works a door off its pivots.
None of it is a reason to replace a door. It is a reason to use the right parts and set the door up correctly in the first place.
Local factors we account for in Flomaton: blowing sand and storm wind — typical of the Alabama Gulf Coast.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895What we repair
- Frame repair after forced entryStraightening and reinforcing damaged aluminum frames.
- Closer repair and replacementConcealed overhead, surface and floor closers repaired or replaced and correctly adjusted.
- Panic and exit device installationFitting and servicing exit devices on storefront entrances.
- Deadlatch and lock serviceAdams Rite style deadlatches, mortise cylinders, hook bolts and keepers.
- Weatherstrip and meeting stile sealsNew seals on pairs of doors and along jambs.
- Push and pull hardwareReplacing handles, push bars and offset pulls, including ADA-compliant hardware.
- Emergency board-up and securingSame-day securing so a business can lock up.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Our storefront door repair process
- Look at the pivot firstOn a sagging storefront door the bottom pivot is the usual culprit, and everything else you might blame is a symptom of it.
- Check the closer independentlyWe disconnect and test the closer separately so we know whether the resistance is the closer or the door binding.
- Secure before we finishIf the deadlatch or the cylinder is the problem, the door is made lockable before we leave, whatever else is outstanding.
- Reset and square the doorPivots set, door squared in the opening, latch engaging cleanly without lifting or pulling.
- Set the closer to codeOpening force and closing speed adjusted for accessibility and for the actual traffic through the door.
- Leave the entrance right for customersIt should open with light pressure, close reliably and lock first time. Anything less will be back on your list. We check the drainage path on every coastal opening, because wind-driven rain gets in where ordinary rain never would.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895What affects the cost of storefront door repair in Flomaton
Every storefront door repair call in Escambia County is a little different, and the cost follows what the door actually needs:
- whether the pivots, closer, or both need replacing
- after-hours or emergency scheduling
- glass replacement and whether board-up is needed first
- frame damage from forced entry
- concealed and floor closers versus surface mounted units
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Flomaton.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895Areas we cover for storefront door repair in Flomaton
Our Flomaton service area includes Main Street and the US-29 corridor and the surrounding Escambia County communities, out around the Flomaton depot and the Florida state line.
We also cover the nearby Escambia County and the Alabama Gulf Coast communities listed further down this page.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Storefront door repair in Flomaton: questions we get asked
How often should storefront doors be serviced?
For a busy Flomaton entrance, once or twice a year. Pivots and closers wear gradually, and adjusting them before they fail is far cheaper than an emergency call when the door will not latch.
Someone broke in and bent the frame. Is it repairable?
In most cases. Aluminum frames damaged at the lock and strike can be straightened and reinforced. We secure the opening first and then do the permanent repair.
Water comes under our front door when it storms. What fixes that?
A new sweep and threshold seal, and sometimes correcting the drainage at the entrance. In Escambia County storms drive water horizontally, so the seal has to work under pressure, not just gravity.
Can you fix the door so it does not slam on customers?
Yes. That is closer adjustment, and it also needs to meet accessibility requirements for opening force. A properly set closer should let a customer through comfortably and still latch the door every time.
Do you replace storefront glass?
Yes, tempered glass for doors, sidelites and transoms. Board-up happens first so you can trade, and the glass follows once the unit is made.
How much does it cost to repair a storefront door versus replacing it?
Repair is dramatically cheaper. Aluminum storefront systems are designed with serviceable parts, and pivots, closers, latches and rails are all replaceable. Replacing an entrance means glass, framing and often the surrounding work.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895Other door repair services in Flomaton
- Sliding Door Repair Flomaton
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair Flomaton
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Flomaton
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Flomaton
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Flomaton
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Flomaton
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Flomaton
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Flomaton
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Door Closer Repair Flomaton
Closers adjusted, rebuilt and replaced so doors shut properly instead of slamming or hanging open.
- Automatic Door Repair Flomaton
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Flomaton
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Flomaton
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Flomaton
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Flomaton
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Flomaton
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Storefront Door Repair near Flomaton
We cover the surrounding Escambia County and the Alabama Gulf Coast communities as well:
- Storefront Door Repair in Atmore
- Storefront Door Repair in Brewton
- Storefront Door Repair in East Brewton
- Storefront Door Repair in Daphne
- Storefront Door Repair in Fairhope
- Storefront Door Repair in Foley
- Storefront Door Repair in Gulf Shores
- Storefront Door Repair in Orange Beach
All door repair services in Flomaton · Storefront Door Repair across Alabama · All Alabama service areas
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895