Alabama Sliding Door Repair Statewide door & window repair Click to Call (205) 619-2895
Home Alabama Killen Screen Door Repair

Killen, Alabama · Lauderdale County

Screen Door Repair in Killen, AL

Screen doors get treated as disposable, which is a shame because most of what fails on them costs very little to fix. Mesh, spline, rollers and corner keys are all replaceable, and the frame is usually fine.

  • Repair first, replace last
  • Homes & businesses
  • Lauderdale County covered
  • Straight answers on the phone

Click to Call (205) 619-2895

Screen Door Repair diagram
Screen Door Repair — Killen, Alabama

We service every part of Killen, including the US-72 corridor and Coffee Cemetery Road, and the nearby Lauderdale County towns like Rogersville and Underwood-Petersville.

Killen has enough older housing stock that repair almost always beats replacement here, and enough new construction that we spend a lot of time on hardware that failed early.

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895

What Killen customers call us about

These are the screen door repair faults we are called out to most often in Killen. If you recognise one, the underlying cause is usually the second half of the line.

  • The screen track itself is damagedThe channel the screen rides in has been bent or worn.
  • Sun damage has made the mesh brittleUV degradation, common on south and west facing doors.
  • The latch does not line upThe door has sagged or the frame has moved.
  • The frame is bent or racked out of squareUsually from being forced back into a track it was not sitting right in.
  • Corners have come apartFailed corner keys, which are replaceable.
  • The frame flexes visibly when you pull the handleFailed corner keys, which is why the whole frame is racking rather than sliding.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

Why screen door repair fails in the Shoals

The Shoals sits right on the Tennessee River, and that water keeps humidity high enough to swell wood doors from May through September. Winter then swings the other direction with repeated freezes that shrink the same material.

Rain drives grit and organic debris into the screen track, and that debris packs down under the rollers and holds moisture against the frame.

Humidity corrodes the steel components in screen rollers and rusts the tiny springs in adjusters, so screens seize up and drop out of their track.

It is why the same repair done properly in Killen lasts, and the same repair done cheaply does not.

Local factors we account for in Killen: heavy rainfall and sustained humidity — typical of the Shoals.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

What a screen door repair call covers

  • RescreeningNew mesh and spline in standard fiberglass, pet-resistant, solar or fine no-see-um mesh.
  • Solar screen installationSolar mesh to cut heat gain through screened openings.
  • Sliding screen replacementCustom-built replacement screen panels where the original is beyond repair.
  • Wind chain and closer installationProtecting storm doors from wind damage.
  • Screen enclosure and porch panel repairRescreening porch and patio enclosure panels.
  • Frame repair and squaringStraightening bent frames and replacing corner keys.
  • Hinged screen door repairHinges, latches, closers and screen panels on swinging screen doors.

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895

How a Killen screen door repair visit works

  1. Work out whether it is the screen or the trackA screen that jams is often a track problem. Replacing rollers in a damaged track fixes nothing.
  2. Assess the frame for squareA racked frame will not sit in the track properly no matter what mesh is in it.
  3. Choose the right meshStandard fiberglass, pet-resistant, solar or fine mesh, depending on pets, sun exposure and what insects you are dealing with. We look for moisture entry at the sill on Shoals jobs, because that is usually where a frame problem starts.
  4. Rescreen with correct tensionToo tight and the frame bows, too loose and it billows. Even tension is what keeps a screen flat and quiet.
  5. Fit and adjust the rollersSet so the panel rides smoothly and stays captured in the head channel.
  6. Test the full travelEnd to end, several times, with the latch engaging cleanly at the close.

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895

What affects the cost of screen door repair in Killen

What a screen door repair job costs comes down to a handful of things, and we would rather be straight about them up front:

  • the size of the panel
  • roller and track work in addition to the screen itself
  • rescreening versus repairing or replacing the frame
  • storm door hardware such as closers and latches
  • custom-built replacement panels where the original is not repairable

Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Killen.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

Areas we cover for screen door repair in Killen

Our Killen service area includes the US-72 corridor and Coffee Cemetery Road and the surrounding Lauderdale County communities, out around Wilson Lake and Joe Wheeler State Park nearby.

Service area: Killen, Lauderdale County, Alabama — and the surrounding communities.

We also cover the nearby Lauderdale County and the Shoals communities listed further down this page.

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895

Screen door repair in Killen: questions we get asked

My screen mesh has gone brittle and crumbles. What happened?

UV exposure. Screens on the south and west sides of a house in Killen take a lot of sun, and standard fiberglass mesh eventually degrades. Solar mesh lasts longer and cuts heat at the same time.

Do you repair storm doors as well as screens?

Yes, including closers, latches, sweeps, hinges and glass or screen inserts. Storm door closers that have torn out of the frame after a gust are one of the most common calls.

My sliding screen keeps falling out. Why does it keep happening?

The rollers have worn down so the panel is riding too low and the top rail no longer sits in the head channel. Lifting it back in without replacing the rollers means it will come out again, usually within days.

My storm door blew open and broke. Can it be repaired?

Usually yes: the closer and its mounting take the damage. We repair the mounting and fit a wind chain so the next gust does not do the same thing.

How long does a rescreen take?

Usually under an hour per panel in Killen. If the frame needs straightening or corner keys replaced, allow a bit longer.

Can you make a screen that keeps out the tiny biting insects?

Yes, fine no-see-um mesh. It has a much tighter weave, and in the parts of Lauderdale County near water it is the only thing that actually works against the smallest biters.

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895

Other door repair services in Killen


Screen Door Repair near Killen

We cover the surrounding Lauderdale County and the Shoals communities as well:

All door repair services in Killen  ·  Screen Door Repair across Alabama  ·  All Alabama service areas

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895
Click to Call (205) 619-2895Tap to speak to a door repair tech now