Kimberly is part of our regular Jefferson County territory, and between the AL-160 corridor, Cooper Road and the the I-65 interchange area we are here most weeks.
Between the established parts of Kimberly and the newer subdivisions, we see two different kinds of failure: worn-out frames on one side of town and worn-out hardware on the other.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Signs you need door closer repair in Kimberly
These are the door closer repair faults we are called out to most often in Kimberly. If you recognise one, the underlying cause is usually the second half of the line.
- The hold-open function has stopped workingWorn hold-open mechanism in the arm.
- There is a knock at the end of the opening swingNo backcheck, or backcheck that has failed, so the arm is bottoming out.
- The door closes at a good speed then slams the last inchLatch speed set too fast, or a worn valve that no longer holds the latch adjustment.
- Mounting screws have pulled the door skin outwardA closer fitted to a hollow door without a reinforcing plate.
- The closer works well cold and slams when hotFluid thinning with temperature in a unit whose valves can no longer compensate.
- Different behavior in summer and winterFluid viscosity changing with temperature, which needs seasonal adjustment or a temperature-stable closer.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895Kimberly conditions and door closer repair
The metro runs humid from April to October, then flips to freezing nights in January, and hardware that was fine in August starts binding in winter.
Wind is the main killer of door closers: a gust drives the door past its opening limit, bends the arm and often tears the mounting out of the door, which is why an overhead stop is not optional on an exposed door.
Humidity swells a wood door so it drags in the frame during the final approach, and turning the closer up to overcome that makes the door punishingly heavy to open while doing nothing about the actual cause.
None of it is a reason to replace a door. It is a reason to use the right parts and set the door up correctly in the first place.
Local factors we account for in Kimberly: storm wind and sustained humidity — typical of the Birmingham metro.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895What a door closer repair call covers
- Fire door closer complianceMaking sure fire-rated openings close and latch fully every time.
- Spring hinge and closer conversionReplacing failed spring hinges with a proper closer where the door needs it.
- Hold-open arm serviceRepairing and adjusting hold-open functions.
- Closer adjustmentSetting sweep speed, latch speed and backcheck correctly for the door and its traffic.
- Delayed action setupAdding delayed closing for accessibility so people have time to get through.
- Wind and stop protectionFitting overhead stops so wind cannot destroy the closer arm.
- Accessibility force adjustmentSetting opening force to meet accessibility requirements without losing reliable latching.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895How we approach door closer repair
- Watch the whole cycle, twiceOpening force, sweep speed, latch speed and backcheck. Each is a separate adjustment and each fails differently.
- Rule out the door before blaming the closerA door binding on the frame makes a perfectly good closer look weak, and turning the closer up is the wrong answer.
- Check for the simple faultsLoose arm fixings, a bent forearm or a seized pinion account for a lot of closers that look dead.
- Size the replacement properlyCloser size depends on door width and weight and on whether it faces exterior wind. Undersized closers fail early. We flush the running surfaces properly on metro jobs rather than just wiping them, since fine clay packs into places a cloth will not reach.
- Set for people, not just for latchingThe door needs to close and latch every time and still be openable by someone with limited strength.
- Fit a stop if it needs oneA closer with no backcheck and no stop will eventually put the handle through the wall and tear its own fixings out.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895What affects the cost of door closer repair in Kimberly
Pricing on door closer repair depends on what has actually failed, which is why we talk it through before quoting. These are the things that move the number:
- fire rating and accessibility compliance requirements
- surface, concealed or floor mounted closer type
- adding overhead stops or hold-open functions
- adjustment versus rebuild versus full replacement
- whether the mounting has to be repaired or reinforced
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Kimberly.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895Areas we cover for door closer repair in Kimberly
Coverage in Kimberly takes in the AL-160 corridor and Cooper Road, plus everything around the I-65 interchange and the Warrior River drainage.
We also cover the nearby Jefferson County and the Birmingham metro communities listed further down this page.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Door closer repair in Kimberly: questions we get asked
How long do door closers last?
A good quality closer on a properly hung door can run for well over a decade. A cheap closer on a heavy exterior door in Kimberly might last a couple of years, especially if it is fighting a misaligned door.
What size closer do I need?
It depends on the door width, weight and exposure. Exterior doors in Jefferson County also need to handle wind, and an undersized closer on a windy exposure gets destroyed.
Do door closers need different settings in summer and winter?
They can. The hydraulic fluid thins in heat and thickens in cold, so a closer set perfectly in Kimberly in August may close too slowly in January. Quality closers hold their setting better across the temperature swing.
There is oil dripping from my door closer. Can it be refilled?
No. Closers are sealed units, and once the seal fails the closer is finished. Refilling is not possible on standard units and the unit needs replacing.
My door does not close all the way. What is going on?
Either the closing force is too low, or the door is dragging on the frame in the last few inches. In Kimberly we see the second one often, because a frame that has moved makes a good closer look weak.
Our fire door is propped open. Is that a problem?
Yes, and it is one of the most common code violations we see. A fire door that cannot close and latch is not doing anything. If it gets propped because it is hard to use, that is the problem to solve.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Other door repair services in Kimberly
- Sliding Door Repair Kimberly
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair Kimberly
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Kimberly
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Kimberly
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Kimberly
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Kimberly
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Kimberly
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Kimberly
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Kimberly
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Automatic Door Repair Kimberly
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Kimberly
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Kimberly
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Kimberly
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Kimberly
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Kimberly
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Door Closer Repair near Kimberly
We cover the surrounding Jefferson County and the Birmingham metro communities as well:
- Door Closer Repair in Bessemer
- Door Closer Repair in Homewood
- Door Closer Repair in Vestavia Hills
- Door Closer Repair in Mountain Brook
- Door Closer Repair in Hueytown
- Door Closer Repair in Center Point
- Door Closer Repair in Gardendale
- Door Closer Repair in Irondale
All door repair services in Kimberly · Door Closer Repair across Alabama · All Alabama service areas
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895