Most of our Oxford calls come from Downtown Oxford and Choccolocco Road, though we work the whole Calhoun County side of it and get out to Jacksonville regularly.
A lot of what we see in Calhoun County comes down to age. Houses built decades ago have solid frames with tired hardware; houses built recently have sound hardware in frames that are still settling.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895When to call about door closer repair
These are the door closer repair faults we are called out to most often in Oxford. If you recognise one, the underlying cause is usually the second half of the line.
- Mounting screws have pulled the door skin outwardA closer fitted to a hollow door without a reinforcing plate.
- Oil running down the door or the wallFailed seal inside the closer body. The unit needs replacing.
- The hold-open function has stopped workingWorn hold-open mechanism in the arm.
- Different behavior in summer and winterFluid viscosity changing with temperature, which needs seasonal adjustment or a temperature-stable closer.
- The closer arm is bentThe door has been forced open past its stop, usually by wind or by a cart.
- The door closes fast then stops shortMismatched sweep and latch speed settings.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895How conditions in Oxford affect door closer repair
The foothills get real cold snaps and real heat, and the ground moves with them. Rocky, uneven fill under older slabs means door frames rarely stay perfectly square for a decade.
When a frame moves with the ground under it, the door binds somewhere in its swing, and people compensate by cranking the closer tighter, which is why so many doors are simultaneously hard to open and still not latching.
Water running down a door face and into a surface closer body corrodes the internals and the mounting fasteners, and a closer that has been wet repeatedly usually fails at the seal.
It is why the same repair done properly in Oxford lasts, and the same repair done cheaply does not.
Local factors we account for in Oxford: soil movement and heavy rainfall — typical of the Appalachian foothills.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895Door closer repair work we handle in Oxford
- Mounting repairRepairing or reinforcing door and frame where closer fasteners have pulled out.
- Fire door closer complianceMaking sure fire-rated openings close and latch fully every time.
- Surface closer replacementNew surface mounted closers sized correctly for door width and weight.
- Spring hinge and closer conversionReplacing failed spring hinges with a proper closer where the door needs it.
- Arm and bracket replacementReplacing bent arms, broken forearms and failed mounting brackets.
- Concealed closer serviceOverhead concealed closers in aluminum storefront doors repaired or replaced.
- Floor closer repairServicing and replacing floor-mounted closers under heavy entrance doors.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Our door closer repair process
- Time the closeA door that shuts in under five seconds or fails to latch tells us which valve is at fault before the cover comes off.
- Rule out the door firstA closer struggling against a binding door is not a faulty closer. Hinges and reveal get checked before we condemn the unit.
- Adjust before replacingMany closers we are called to are serviceable and simply out of adjustment. That is a much smaller job and we say so. Foothill jobs get assessed for wind loading, because doors here take gusts that flatten seals unevenly.
- Match to the opening's dutyA fire door, an accessible entrance and an internal office door have different requirements, and the specification follows the door.
- Set for people, not just for latchingThe door needs to close and latch every time and still be openable by someone with limited strength.
- Fit a stop if it needs oneA closer with no backcheck and no stop will eventually put the handle through the wall and tear its own fixings out.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895What affects the cost of door closer repair in Oxford
There is no single price for door closer repair in Oxford, because two doors with identical symptoms can need very different work. Here is what makes the difference:
- adding overhead stops or hold-open functions
- surface, concealed or floor mounted closer type
- the size and weight of the door and its exposure to wind
- whether the mounting has to be repaired or reinforced
- adjustment versus rebuild versus full replacement
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Oxford.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895Areas we cover for door closer repair in Oxford
Coverage in Oxford takes in Downtown Oxford, Choccolocco Road, the Oxford Exchange area and Snow Street, plus everything around Oxford Lake Park, the Oxford Exchange and Coldwater Mountain bike trails.
We also cover the nearby Calhoun County and the Appalachian foothills communities listed further down this page.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Door closer repair in Oxford: questions we get asked
Do you work on floor closers?
Yes. Floor closers under heavy entrance doors are serviceable, though they are more involved to work on because the unit sits in the floor.
The closer arm on our door is bent. What causes that?
The door was opened past its limit, usually by wind catching it or by someone pushing it hard against a wall. Replacing the arm without adding an overhead stop just means it happens again.
Why is our door so heavy to open now?
Somebody has probably turned the closer up to force a door that was not latching. That is treating a symptom, and it makes the door difficult for customers and staff. Fix the latching problem and the closer can come back to a reasonable setting.
Do door closers need different settings in summer and winter?
They can. The hydraulic fluid thins in heat and thickens in cold, so a closer set perfectly in Oxford in August may close too slowly in January. Quality closers hold their setting better across the temperature swing.
What size closer do I need?
It depends on the door width, weight and exposure. Exterior doors in Calhoun County also need to handle wind, and an undersized closer on a windy exposure gets destroyed.
My door slams every time. Can that be adjusted?
Almost always. There is a latch speed valve on the closer that controls the last few inches, and it has probably drifted or been set wrong. Adjusting it takes minutes and saves your frame, hinges and hardware from a lot of abuse.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Other door repair services in Oxford
- Sliding Door Repair Oxford
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair Oxford
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Oxford
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Oxford
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Oxford
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Oxford
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Oxford
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Oxford
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Oxford
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Automatic Door Repair Oxford
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Oxford
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Oxford
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Oxford
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Oxford
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Oxford
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Door Closer Repair near Oxford
We cover the surrounding Calhoun County and the Appalachian foothills communities as well:
- Door Closer Repair in Jacksonville
- Door Closer Repair in Saks
- Door Closer Repair in Weaver
- Door Closer Repair in Alexandria
- Door Closer Repair in Piedmont
- Door Closer Repair in Ohatchee
- Door Closer Repair in West End-Cobb Town
- Door Closer Repair in Choccolocco
All door repair services in Oxford · Door Closer Repair across Alabama · All Alabama service areas
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895