We know Cordova well: the older housing around Downtown Cordova, the newer construction toward Main Street, and everything out past the Mulberry Fork.
A lot of what we see in Walker County comes down to age. Houses built decades ago have solid frames with tired hardware; houses built recently have sound hardware in frames that are still settling.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895What Cordova customers call us about
These are the sliding door repair faults we are called out to most often in Cordova. If you recognise one, the underlying cause is usually the second half of the line.
- A loud grinding or scraping noiseMetal-on-metal contact where the roller housing has broken through and is riding on the bare track.
- The door will not latch anymoreThe panel has settled out of square, so the hook or mortise latch no longer lines up with the keeper.
- It slides fine one way and binds the otherOne roller of the tandem pair has collapsed, so the panel is running out of level.
- You can lift the panel visibly in its openingExcess head clearance from a sagging header, which is what lets it jump the track.
- Cold air pouring in around the edgesCollapsed weatherstrip and worn pile seals, and often a gap the panel misalignment created.
- The screen door falls out constantlyWorn screen rollers and a bent top or bottom rail on the screen frame.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Why sliding door repair fails in the Birmingham metro
The metro runs humid from April to October, then flips to freezing nights in January, and hardware that was fine in August starts binding in winter.
Storm wind pushes hard on the large flat surface of a patio slider and drives the panel against the interlock, which loosens roller adjustment over time and works the panel out of alignment with its latch keeper.
When the soil under a slab swells and shrinks, the wide opening a patio slider sits in is one of the first places the movement shows, and a frame that has racked even a quarter inch will make a brand new set of rollers bind on one end of the travel.
We factor that in on every sliding door repair job around the Mulberry Fork and the rest of Cordova.
Local factors we account for in Cordova: storm wind and soil movement — typical of the Birmingham metro.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895What we repair
- Screen door rebuildNew screen rollers, spline, mesh and corner keys.
- Handle set replacementInterior and exterior pulls, including keyed exterior handle sets.
- Multi-panel and pocket door serviceAlignment and hardware work on stacking and pocketing patio systems.
- Roller replacementTandem steel or nylon roller assemblies matched to the door manufacturer and panel weight.
- Weep hole clearingOpening blocked sill drainage so the track sheds water instead of holding it.
- Track repair and cappingStainless track caps installed over worn aluminum so the new rollers ride on a fresh surface.
- Weatherstrip and pile seal replacementNew fin seal and bulb weatherstrip to close the gaps that let air and water in.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Our sliding door repair process
- Look at the whole opening, not just the doorWe check the panel, the track, the head channel and the frame for square before touching a screwdriver, because a door that is fighting the frame will eat a new set of rollers in a year.
- Pull and inspect the panelThe panel comes out so we can see the roller housings, the bottom rail and the condition of the track underneath.
- Match rollers to the door, not the cataloguePanel weight, housing type and track profile all decide the roller. Fitting whatever is on the van is why doors come back.
- Bring the running surface backA pitted or peened track will destroy new rollers in a season, so it gets dressed, capped or replaced before anything goes back in.
- Level the panel, then set the heightBoth adjusters are wound together so the panel sits level and the interlock engages along its whole length, not just at the top. Metro-area openings often sit on clay that moves seasonally, so we check the frame for square before touching the hardware.
- Check the weep holes before we goA door that slides beautifully but drains badly will still put water on your floor, so the drainage gets cleared and tested.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895What affects the cost of sliding door repair in Cordova
We would rather tell you what drives the price than quote a number that turns out to be wrong once we see the door. On a sliding door repair job in Cordova, the main variables are these:
- how much damage the worn track has taken before the call
- the age of the door and whether replacement hardware is still made for it
- how many panels the system has, since three and four panel doors take longer to set
- the size and weight of the panel, since heavy insulated glass units need heavier assemblies
- whether the frame has moved and needs shimming or refastening
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Cordova.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Areas we cover for sliding door repair in Cordova
We work throughout Cordova, including Downtown Cordova and Main Street. If you are near the Mulberry Fork and the Cordova bridge, that is inside our normal service area.
We also cover the nearby Walker County and the Birmingham metro communities listed further down this page.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895Sliding door repair in Cordova: questions we get asked
Do you work on the big multi-panel and stacking patio doors?
Yes. Those systems put a lot of weight on each roller and they are less forgiving of a frame that is even slightly out of square, so alignment work matters more on them than on a standard two-panel door.
Do you replace the glass in sliding doors too?
Yes. Fogged units where the insulated seal has failed, cracked panes and full tempered glass replacement are all part of what we do, and we can usually keep the existing frame.
My door came off the track. Did I break something?
Usually not. A panel comes out of the track when it has dropped low enough that the head channel no longer holds it, which means the rollers were already worn or the adjustment screws backed out. Putting it back without correcting the height means it will happen again.
How long does a sliding door repair take?
Most single roller-and-track jobs in Cordova take one to two hours. Multi-panel doors, doors with damaged tracks that need capping, or units that also need glass work take longer, and we tell you which category yours falls into before we start.
What does it mean when there is water pooling in the track?
The weep holes that drain the sill are blocked. It is one of the most common causes of water on the floor inside, and it is also one of the easiest things to fix, but if it sits long enough it rusts the roller assemblies out.
Can you fix the lock without fixing the door?
Sometimes, but if the door has settled, a new lock will not line up with the keeper any better than the old one did. We check the panel alignment first, because a lock that will not catch is often a symptom rather than the actual problem.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Other door repair services in Cordova
- Door Lock Repair Cordova
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Cordova
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Cordova
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Cordova
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Cordova
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Cordova
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Cordova
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Cordova
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Door Closer Repair Cordova
Closers adjusted, rebuilt and replaced so doors shut properly instead of slamming or hanging open.
- Automatic Door Repair Cordova
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Cordova
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Cordova
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Cordova
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Cordova
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Cordova
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Sliding Door Repair near Cordova
We cover the surrounding Walker County and the Birmingham metro communities as well:
- Sliding Door Repair in Dora
- Sliding Door Repair in Jasper
- Sliding Door Repair in Sumiton
- Sliding Door Repair in Parrish
- Sliding Door Repair in Carbon Hill
- Sliding Door Repair in Bessemer
- Sliding Door Repair in Homewood
- Sliding Door Repair in Vestavia Hills
All door repair services in Cordova · Sliding Door Repair across Alabama · All Alabama service areas
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895