Alabama Sliding Door Repair Statewide door & window repair Click to Call (205) 619-2895
Home Alabama Harvest Screen Door Repair

Harvest, Alabama · Madison County

Screen Door Repair in Harvest, AL

Screen doors get treated as disposable, which is a shame because most of what fails on them costs very little to fix. Mesh, spline, rollers and corner keys are all replaceable, and the frame is usually fine.

  • Repair first, replace last
  • Homes & businesses
  • Madison County covered
  • Straight answers on the phone

Click to Call (205) 619-2895

Screen Door Repair diagram
Screen Door Repair — Harvest, Alabama

We know Harvest well: the older housing around Wall Triana Highway, the newer construction toward Capshaw, and everything out past Monrovia.

Between the established parts of Harvest and the newer subdivisions, we see two different kinds of failure: worn-out frames on one side of town and worn-out hardware on the other.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

Common screen door repair faults in Madison County

These are the screen door repair faults we are called out to most often in Harvest. If you recognise one, the underlying cause is usually the second half of the line.

  • The frame is bent or racked out of squareUsually from being forced back into a track it was not sitting right in.
  • The mesh is torn or has holesStraightforward rescreen, and worth doing before the tear spreads.
  • The spline has lifted out of the channel at a cornerShrunken or hardened spline, usually after several summers of UV exposure.
  • Mesh sagging and billowingLoose or dried-out spline that is no longer holding the mesh tight.
  • The screen door falls out of the trackWorn screen rollers or a bent top rail that no longer holds the panel in the head channel.
  • The latch does not line upThe door has sagged or the frame has moved.

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895

What we see on screen door repair around Madison County

River humidity off the Tennessee keeps interior air damp well into October, then the first hard freeze arrives and every seal, sweep and gasket in the house gets tested overnight.

Humidity corrodes the steel components in screen rollers and rusts the tiny springs in adjusters, so screens seize up and drop out of their track.

Wind gets behind a screen panel and pushes it out of the track, and on hinged screen and storm doors a gust catching the door is what tears closers out of the frame.

None of it is a reason to replace a door. It is a reason to use the right parts and set the door up correctly in the first place.

Local factors we account for in Harvest: sustained humidity and storm wind — typical of the Tennessee Valley.

Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.

Click to Call (205) 619-2895

What we repair

  • Screen enclosure and porch panel repairRescreening porch and patio enclosure panels.
  • Storm door repairClosers, latches, hinges, sweeps and glass or screen inserts on storm doors.
  • Screen track repairRepairing or replacing the channel the screen rides in.
  • Sliding screen replacementCustom-built replacement screen panels where the original is beyond repair.
  • Handle and latch replacementNew pulls and latches on screen and storm doors.
  • RescreeningNew mesh and spline in standard fiberglass, pet-resistant, solar or fine no-see-um mesh.
  • Hinged screen door repairHinges, latches, closers and screen panels on swinging screen doors.

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895

What happens when we get there

  1. Work out whether it is the screen or the trackA screen that jams is often a track problem. Replacing rollers in a damaged track fixes nothing.
  2. Check the frame for squareA racked frame will never slide properly. Corner keys get reset before anything else is considered.
  3. Choose mesh for the jobStandard, pet-resistant, solar or fine insect mesh. The right one depends on the door, the exposure and what tore the last one.
  4. Rescreen with correct tensionEven tension and properly seated spline so the mesh does not sag or pull out of the channel.
  5. Fit and adjust the rollersBoth rollers set so the frame runs level and the latch meets its keeper without lifting. We look at how the opening behaves wet and dry, since the fault often only appears in one half of the year.
  6. Test the full travelThe door should move with one finger, latch cleanly and stay in the track.

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895

What affects the cost of screen door repair in Harvest

There is no single price for screen door repair in Harvest, because two doors with identical symptoms can need very different work. Here is what makes the difference:

  • rescreening versus repairing or replacing the frame
  • the size of the panel
  • roller and track work in addition to the screen itself
  • custom-built replacement panels where the original is not repairable
  • the mesh type chosen, from standard fiberglass to pet-resistant and solar

Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Harvest.

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895

Areas we cover for screen door repair in Harvest

We work throughout Harvest, including Wall Triana Highway, Capshaw and Yarbrough Road. If you are near Monrovia, Sparkman High School and the Beaverdam Swamp, that is inside our normal service area.

Service area: Harvest, Madison County, Alabama — and the surrounding communities.

We also cover the nearby Madison County and the Tennessee Valley communities listed further down this page.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

Screen door repair in Harvest: questions we get asked

Can a bent screen frame be straightened?

Sometimes. Light aluminum frames can often be brought back to square, but a badly racked frame is usually better replaced, and a custom panel is not expensive.

My storm door blew open and broke. Can it be repaired?

Usually yes: the closer and its mounting take the damage. We repair the mounting and fit a wind chain so the next gust does not do the same thing.

Will a solar screen make my room cooler?

It helps noticeably on a sunny exposure. Solar mesh blocks a good portion of the heat before it reaches the glass, which matters on west-facing doors during Harvest summers.

Do you repair storm doors as well as screens?

Yes, including closers, latches, sweeps, hinges and glass or screen inserts. Storm door closers that have torn out of the frame after a gust are one of the most common calls.

Is it worth rescreening or should I just buy a new screen door?

Rescreening is far cheaper and the frame is usually fine. New panels only make sense when the frame is bent beyond straightening or the corners are gone.

My screen mesh has gone brittle and crumbles. What happened?

UV exposure. Screens on the south and west sides of a house in Harvest take a lot of sun, and standard fiberglass mesh eventually degrades. Solar mesh lasts longer and cuts heat at the same time.

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895

Other door repair services in Harvest

Screen Door Repair near Harvest

We cover the surrounding Madison County and the Tennessee Valley communities as well:

All door repair services in Harvest  ·  Screen Door Repair across Alabama  ·  All Alabama service areas

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895
Click to Call (205) 619-2895Tap to speak to a door repair tech now