Whether you are near Monrovia, over in Wall Triana Highway, or on the Capshaw side of Harvest, it is the same coverage and the same crew.
A lot of what we see in Madison County comes down to age. Houses built decades ago have solid frames with tired hardware; houses built recently have sound hardware in frames that are still settling.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Common door closer repair faults in Madison County
These are the door closer repair faults we are called out to most often in Harvest. If you recognise one, the underlying cause is usually the second half of the line.
- The arm has come loose at the forearm connectionA backed-out or stripped screw, which will bend the arm if it is left.
- Mounting screws have pulled the door skin outwardA closer fitted to a hollow door without a reinforcing plate.
- The closer works well cold and slams when hotFluid thinning with temperature in a unit whose valves can no longer compensate.
- Different behavior in summer and winterFluid viscosity changing with temperature, which needs seasonal adjustment or a temperature-stable closer.
- The door needs more force to open than it used toRising internal friction, and on an accessible entrance this can push opening force out of compliance.
- The door slams open against the wallBackcheck has failed or is not adjusted, and the arm and frame are taking the impact.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895What we see on door closer repair around Madison County
River humidity off the Tennessee keeps interior air damp well into October, then the first hard freeze arrives and every seal, sweep and gasket in the house gets tested overnight.
Water running down a door face and into a surface closer body corrodes the internals and the mounting fasteners, and a closer that has been wet repeatedly usually fails at the seal.
Humidity swells a wood door so it drags in the frame during the final approach, and turning the closer up to overcome that makes the door punishingly heavy to open while doing nothing about the actual cause.
We see the pattern often enough across Madison County that we usually know what we are looking at before we arrive.
Local factors we account for in Harvest: heavy rainfall and sustained humidity — typical of the Tennessee Valley.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Door closer repair work we handle in Harvest
- Closer adjustmentSetting sweep speed, latch speed and backcheck correctly for the door and its traffic.
- Arm and bracket replacementReplacing bent arms, broken forearms and failed mounting brackets.
- Mounting repairRepairing or reinforcing door and frame where closer fasteners have pulled out.
- Wind and stop protectionFitting overhead stops so wind cannot destroy the closer arm.
- Concealed closer serviceOverhead concealed closers in aluminum storefront doors repaired or replaced.
- Fire door closer complianceMaking sure fire-rated openings close and latch fully every time.
- Accessibility force adjustmentSetting opening force to meet accessibility requirements without losing reliable latching.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895How a Harvest door closer repair visit works
- Watch the whole cycle, twiceOpening force, sweep speed, latch speed and backcheck. Each is a separate adjustment and each fails differently.
- Rule out the door before blaming the closerA door binding on the frame makes a perfectly good closer look weak, and turning the closer up is the wrong answer.
- Adjust before replacingMany closers we are called to are serviceable and simply out of adjustment. That is a much smaller job and we say so.
- Match to the opening's dutyA fire door, an accessible entrance and an internal office door have different requirements, and the specification follows the door.
- Set for people, not just for latchingThe door needs to close and latch every time and still be openable by someone with limited strength. Through the Valley we check for seasonal swelling before removing any material, because a door planed in August is a door with a gap in January.
- Fit a stop where it is neededA door with no stop will destroy its own closer the first time the wind catches it.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895What affects the cost of door closer repair in Harvest
There is no single price for door closer repair in Harvest, because two doors with identical symptoms can need very different work. Here is what makes the difference:
- fire rating and accessibility compliance requirements
- whether the mounting has to be repaired or reinforced
- adding overhead stops or hold-open functions
- adjustment versus rebuild versus full replacement
- the size and weight of the door and its exposure to wind
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Harvest.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Areas we cover for door closer repair in Harvest
Coverage in Harvest takes in Wall Triana Highway, Capshaw and Yarbrough Road, plus everything around Monrovia, Sparkman High School and the Beaverdam Swamp.
We also cover the nearby Madison County and the Tennessee Valley communities listed further down this page.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Door closer repair in Harvest: questions we get asked
Do door closers need different settings in summer and winter?
They can. The hydraulic fluid thins in heat and thickens in cold, so a closer set perfectly in Harvest in August may close too slowly in January. Quality closers hold their setting better across the temperature swing.
The closer arm on our door is bent. What causes that?
The door was opened past its limit, usually by wind catching it or by someone pushing it hard against a wall. Replacing the arm without adding an overhead stop just means it happens again.
My door slams every time. Can that be adjusted?
Almost always. There is a latch speed valve on the closer that controls the last few inches, and it has probably drifted or been set wrong. Adjusting it takes minutes and saves your frame, hinges and hardware from a lot of abuse.
Why is our door so heavy to open now?
Somebody has probably turned the closer up to force a door that was not latching. That is treating a symptom, and it makes the door difficult for customers and staff. Fix the latching problem and the closer can come back to a reasonable setting.
My door does not close all the way. What is going on?
Either the closing force is too low, or the door is dragging on the frame in the last few inches. In Harvest we see the second one often, because a frame that has moved makes a good closer look weak.
Do you work on floor closers?
Yes. Floor closers under heavy entrance doors are serviceable, though they are more involved to work on because the unit sits in the floor.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Other door repair services in Harvest
- Sliding Door Repair Harvest
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair Harvest
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Harvest
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Harvest
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Harvest
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Harvest
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Harvest
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Harvest
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Harvest
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Automatic Door Repair Harvest
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Harvest
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Harvest
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Harvest
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Harvest
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Harvest
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Door Closer Repair near Harvest
We cover the surrounding Madison County and the Tennessee Valley communities as well:
- Door Closer Repair in Madison
- Door Closer Repair in Meridianville
- Door Closer Repair in Hazel Green
- Door Closer Repair in Moores Mill
- Door Closer Repair in Triana
- Door Closer Repair in New Hope
- Door Closer Repair in Owens Cross Roads
- Door Closer Repair in Redstone Arsenal
All door repair services in Harvest · Door Closer Repair across Alabama · All Alabama service areas
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895