We service every part of Madison, including Downtown Madison and Clift Farm, and the nearby Madison County towns like Meridianville and Harvest.
A lot of what we see in Madison County comes down to age. Houses built decades ago have solid frames with tired hardware; houses built recently have sound hardware in frames that are still settling.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895What Madison customers call us about
These are the door closer repair faults we are called out to most often in Madison. If you recognise one, the underlying cause is usually the second half of the line.
- The door is very hard to push openCloser over-tensioned, often to compensate for a door that will not latch.
- Oil running down the door or the wallFailed seal inside the closer body. The unit needs replacing.
- The closer arm is bentThe door has been forced open past its stop, usually by wind or by a cart.
- Different behavior in summer and winterFluid viscosity changing with temperature, which needs seasonal adjustment or a temperature-stable closer.
- The door does not close the last inchClosing force is too low, or the door is binding on the frame in the final approach.
- A fire door that stays openSerious safety issue: failed closer or a hold-open that should be releasing.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895Madison conditions and door closer repair
The Tennessee Valley runs a wider temperature swing than most of Alabama. Summer humidity sits on aluminum and vinyl frames for months, then December through February drops below freezing dozens of nights, and the valley picks up an ice event every few winters.
Humidity swells a wood door so it drags in the frame during the final approach, and turning the closer up to overcome that makes the door punishingly heavy to open while doing nothing about the actual cause.
Water running down a door face and into a surface closer body corrodes the internals and the mounting fasteners, and a closer that has been wet repeatedly usually fails at the seal.
It is why the same repair done properly in Madison lasts, and the same repair done cheaply does not.
Local factors we account for in Madison: sustained humidity and heavy rainfall — typical of the Tennessee Valley.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895What a door closer repair call covers
- Concealed closer serviceOverhead concealed closers in aluminum storefront doors repaired or replaced.
- Fire door closer complianceMaking sure fire-rated openings close and latch fully every time.
- Accessibility force adjustmentSetting opening force to meet accessibility requirements without losing reliable latching.
- Arm and bracket replacementReplacing bent arms, broken forearms and failed mounting brackets.
- Closer adjustmentSetting sweep speed, latch speed and backcheck correctly for the door and its traffic.
- Mounting repairRepairing or reinforcing door and frame where closer fasteners have pulled out.
- Spring hinge and closer conversionReplacing failed spring hinges with a proper closer where the door needs it.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895What happens when we get there
- Watch the whole cycle, twiceOpening force, sweep speed, latch speed and backcheck. Each is a separate adjustment and each fails differently.
- Rule out the door before blaming the closerA door binding on the frame makes a perfectly good closer look weak, and turning the closer up is the wrong answer.
- Check for the simple faultsLoose arm fixings, a bent forearm or a seized pinion account for a lot of closers that look dead. Valley jobs get checked across the humidity swing, so we adjust for the range rather than for the day we happen to be there.
- Match to the opening's dutyA fire door, an accessible entrance and an internal office door have different requirements, and the specification follows the door.
- Set for people, not just for latchingThe door needs to close and latch every time and still be openable by someone with limited strength.
- Reinforce the mountingOn a hollow door we fit a backing plate rather than driving screws into a skin that will pull out again.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895What affects the cost of door closer repair in Madison
There is no single price for door closer repair in Madison, because two doors with identical symptoms can need very different work. Here is what makes the difference:
- the size and weight of the door and its exposure to wind
- surface, concealed or floor mounted closer type
- adding overhead stops or hold-open functions
- whether the mounting has to be repaired or reinforced
- adjustment versus rebuild versus full replacement
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Madison.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895Areas we cover for door closer repair in Madison
Coverage in Madison takes in Downtown Madison, Clift Farm, Town Madison and Heritage Plantation, plus everything around Toyota Field, the Madison Station Historic District and Dublin Park.
We also cover the nearby Madison County and the Tennessee Valley communities listed further down this page.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895Door closer repair in Madison: questions we get asked
There is oil dripping from my door closer. Can it be refilled?
No. Closers are sealed units, and once the seal fails the closer is finished. Refilling is not possible on standard units and the unit needs replacing.
My door does not close all the way. What is going on?
Either the closing force is too low, or the door is dragging on the frame in the last few inches. In Madison we see the second one often, because a frame that has moved makes a good closer look weak.
Why is our door so heavy to open now?
Somebody has probably turned the closer up to force a door that was not latching. That is treating a symptom, and it makes the door difficult for customers and staff. Fix the latching problem and the closer can come back to a reasonable setting.
How long do door closers last?
A good quality closer on a properly hung door can run for well over a decade. A cheap closer on a heavy exterior door in Madison might last a couple of years, especially if it is fighting a misaligned door.
What size closer do I need?
It depends on the door width, weight and exposure. Exterior doors in Madison County also need to handle wind, and an undersized closer on a windy exposure gets destroyed.
Do you work on floor closers?
Yes. Floor closers under heavy entrance doors are serviceable, though they are more involved to work on because the unit sits in the floor.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Other door repair services in Madison
- Sliding Door Repair Madison
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair Madison
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Madison
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Madison
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Madison
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Madison
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Madison
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Madison
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Madison
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Automatic Door Repair Madison
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Madison
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Madison
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Madison
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Madison
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Madison
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Door Closer Repair near Madison
We cover the surrounding Madison County and the Tennessee Valley communities as well:
- Door Closer Repair in Meridianville
- Door Closer Repair in Harvest
- Door Closer Repair in Hazel Green
- Door Closer Repair in Moores Mill
- Door Closer Repair in Triana
- Door Closer Repair in New Hope
- Door Closer Repair in Owens Cross Roads
- Door Closer Repair in Redstone Arsenal
All door repair services in Madison · Door Closer Repair across Alabama · All Alabama service areas
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895