Most of our Reform calls come from Main Street and the US-82 corridor, though we work the whole Pickens County side of it and get out to Aliceville regularly.
Reform has enough older housing stock that repair almost always beats replacement here, and enough new construction that we spend a lot of time on hardware that failed early.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Signs you need sliding door repair in Reform
These are the sliding door repair faults we are called out to most often in Reform. If you recognise one, the underlying cause is usually the second half of the line.
- The door bounces or chatters as it movesFlat spots worn onto nylon roller wheels that have been running on grit.
- You can lift the panel visibly in its openingExcess head clearance from a sagging header, which is what lets it jump the track.
- The screen door falls out constantlyWorn screen rollers and a bent top or bottom rail on the screen frame.
- Daylight at the top or bottom cornerThe panel is out of plumb, usually from uneven roller adjustment or a frame that has moved.
- It jumps off the trackThe panel has dropped low enough that it is no longer captured by the head channel, or the roller adjustment screws have backed out.
- The door stops short of the jamb by half an inchDebris packed at the end of the track, or an adjuster screw wound fully out.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895How conditions in Reform affect sliding door repair
Humidity stays high from late spring through September, which is exactly when wood doors that fit fine in winter start dragging on the jamb.
Sliding door sills are designed to collect water and drain it back outside through weep holes, and after a heavy rain those weeps are exactly where debris ends up, so the track fills, the water backs over the interior lip, and the roller assemblies sit in standing water.
Long humid stretches keep condensation on the cold aluminum frame of a slider almost continuously, and that moisture rusts roller axles and adjustment screws from the inside, which is why the screws often shear when someone finally tries to adjust the door.
It is why the same repair done properly in Reform lasts, and the same repair done cheaply does not.
Local factors we account for in Reform: heavy rainfall and sustained humidity — typical of west Alabama.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Our sliding door repair services in Reform
- Weatherstrip and pile seal replacementNew fin seal and bulb weatherstrip to close the gaps that let air and water in.
- Track repair and cappingStainless track caps installed over worn aluminum so the new rollers ride on a fresh surface.
- Weep hole clearingOpening blocked sill drainage so the track sheds water instead of holding it.
- Multi-panel and pocket door serviceAlignment and hardware work on stacking and pocketing patio systems.
- Screen door rebuildNew screen rollers, spline, mesh and corner keys.
- Roller replacementTandem steel or nylon roller assemblies matched to the door manufacturer and panel weight.
- Glass unit replacementTempered insulated glass replacement for fogged or broken panels.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Our sliding door repair process
- Watch it move before touching anythingWe run the door end to end and listen. Where the noise starts and where the effort peaks tells us which roller has gone.
- Pull and inspect the panelThe panel comes out so we can see the roller housings, the bottom rail and the condition of the track underneath.
- Match rollers to the door, not the cataloguePanel weight, housing type and track profile all decide the roller. Fitting whatever is on the van is why doors come back.
- Bring the running surface backA pitted or peened track will destroy new rollers in a season, so it gets dressed, capped or replaced before anything goes back in.
- Set and adjustThe panel goes back in, gets plumbed, and the roller height is set so the door latches and seals along its whole edge.
- Hand it back working the way you use itWe open and close it the way you would, one-handed, and check the lock, the screen and the drainage before we leave. We assess whether the opening has shifted before adjusting hardware, since correcting the symptom here tends not to hold.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895What affects the cost of sliding door repair in Reform
What a sliding door repair job costs comes down to a handful of things, and we would rather be straight about them up front:
- how many panels the system has, since three and four panel doors take longer to set
- the age of the door and whether replacement hardware is still made for it
- whether the fix is rollers only or rollers plus track repair
- whether the frame has moved and needs shimming or refastening
- the size and weight of the panel, since heavy insulated glass units need heavier assemblies
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Reform.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895Areas we cover for sliding door repair in Reform
Coverage in Reform takes in Main Street and the US-82 corridor, plus everything around the Luxapallila Creek and the Mississippi line nearby.
We also cover the nearby Pickens County and west Alabama communities listed further down this page.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Sliding door repair in Reform: questions we get asked
Do you charge to come look at it?
We talk through the symptoms on the phone first, because a lot of sliding door problems can be narrowed down from a good description and a photo of the bottom rail. Call and we will tell you what we think is going on and what it takes to fix.
Do you work on the big multi-panel and stacking patio doors?
Yes. Those systems put a lot of weight on each roller and they are less forgiving of a frame that is even slightly out of square, so alignment work matters more on them than on a standard two-panel door.
Can a sliding door that has stopped rolling be fixed, or does it need replacing?
Almost always fixed. The frame and glass are usually fine and it is the two small roller assemblies underneath that have failed. Replacing a whole patio door in Reform is a several thousand dollar job; rebuilding the rollers and track is a fraction of that and gets you a door that rolls better than it has in years.
Why does my sliding door work fine in winter and stick in summer?
That is a moisture and expansion problem, and it is common across Pickens County. Humid months swell wood and vinyl components and expand the frame slightly, which is enough to close up clearance that was already marginal because of worn rollers.
Will new rollers fix a door that scrapes loudly?
Only if the track is still in good condition. Once a roller has broken through and the housing has been riding on bare aluminum, the track has a groove worn in it, and new rollers dropped onto that groove will fail quickly. That is when we cap the track.
What does it mean when there is water pooling in the track?
The weep holes that drain the sill are blocked. It is one of the most common causes of water on the floor inside, and it is also one of the easiest things to fix, but if it sits long enough it rusts the roller assemblies out.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Other door repair services in Reform
- Door Lock Repair Reform
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Reform
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Reform
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Reform
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Reform
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Reform
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Reform
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Reform
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Door Closer Repair Reform
Closers adjusted, rebuilt and replaced so doors shut properly instead of slamming or hanging open.
- Automatic Door Repair Reform
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Reform
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Reform
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Reform
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Reform
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Reform
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Sliding Door Repair near Reform
We cover the surrounding Pickens County and west Alabama communities as well:
- Sliding Door Repair in Aliceville
- Sliding Door Repair in Carrollton
- Sliding Door Repair in Gordo
- Sliding Door Repair in Northport
- Sliding Door Repair in Cottondale
- Sliding Door Repair in Holt
- Sliding Door Repair in Coker
- Sliding Door Repair in Coaling
All door repair services in Reform · Sliding Door Repair across Alabama · All Alabama service areas
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895