We service every part of Enterprise, including Downtown Enterprise and the Boll Weevil Circle, and the nearby Coffee County towns like Elba and New Brockton.
Enterprise has enough older housing stock that repair almost always beats replacement here, and enough new construction that we spend a lot of time on hardware that failed early.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895Common door lock repair faults in Coffee County
These are the door lock repair faults we are called out to most often in Enterprise. If you recognise one, the underlying cause is usually the second half of the line.
- The bolt leaves a bright scrape mark on the strikeDirect evidence of misalignment. The mark shows exactly which way the door has moved.
- The key turns hard or sticksWorn cylinder pins, debris in the keyway, or a key that has been copied from a copy too many times.
- The key only works if you lift or lean on the doorThe bolt is binding in the strike because the door is sitting low in the opening.
- Two locks on the same door need different keysMismatched cylinders from a previous partial replacement, easily re-keyed to one key.
- The latch does not retract when you turn the handleFailed spindle, broken spring cassette or a seized latch bolt.
- Corrosion visible around the cylinder faceSalt or moisture attacking the internals, which will seize the lock if it is not addressed.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895How conditions in Enterprise affect door lock repair
Sandy soil here drains fast but also shifts, and blowing sand is a constant presence in sliding door tracks and screen channels.
Heat expands a metal door and its frame through the afternoon, and on a west-facing entry the deadbolt can throw perfectly at breakfast and bind against the strike by evening, which is a thermal problem rather than a hardware one.
Water running down a door face finds its way into the lock body on any door without an adequate drip cap, and the internal springs in a latch mechanism rust and lose tension long before anything visible happens on the outside.
None of it is a reason to replace a door. It is a reason to use the right parts and set the door up correctly in the first place.
Local factors we account for in Enterprise: sun and heat load and heavy rainfall — typical of the Wiregrass.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895Door lock repair work we handle in Enterprise
- Frame reinforcementLonger screws, strike boxes and reinforcement plates to strengthen an entry that has been forced or worn.
- Deadbolt repair and replacementSingle and double cylinder deadbolts, including grade-rated hardware for exterior doors.
- Smart lock installation and troubleshootingFitting motorized deadbolts and correcting the alignment issues that make them fail.
- Mortise lock serviceRebuilding and adjusting mortise lock cases on older entry doors.
- Keyed-alike setupsSetting multiple doors on one key so a house or a building runs on a single key.
- Cylinder rebuild and rekeyingRepinning existing cylinders so old keys stop working without replacing the whole lockset.
- Broken key extractionRemoving snapped keys and correcting whatever caused the key to break.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Our door lock repair process
- Watch the bolt meet the strikeWe close the door slowly and see where the bolt lands. Most lock complaints are alignment complaints.
- Diagnose the failure pointCylinder, latch mechanism, linkage or strike. Each one feels different under the key, and each one has a different fix.
- Correct what movedIf the door has dropped or the frame has shifted, that gets fixed first. Filing the strike to fit a moved door just buys a few months.
- Fit for the exposure, not the price listDoor thickness, backset and how much weather the opening sees all decide the hardware. Interior-grade parts on an exposed door fail fast.
- Set the throw and the engagementThe bolt should extend fully with the door closed and no hand pressure on it, and the latch should catch without a push.
- Test every key in every lockIncluding the spares. Keys that were cut from copies are a common cause of a lock that feels rough. We look at how much sand is reaching the opening, since sometimes a sweep or a threshold change does more good than new hardware.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895What affects the cost of door lock repair in Enterprise
Pricing on door lock repair depends on what has actually failed, which is why we talk it through before quoting. These are the things that move the number:
- commercial hardware requirements like fire ratings and lever functions
- the number of doors being keyed alike
- whether the lock can be rebuilt or needs full replacement
- the grade and finish of the hardware you choose
- whether the frame or strike also needs correction
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Enterprise.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Areas we cover for door lock repair in Enterprise
Coverage in Enterprise takes in Downtown Enterprise, the Boll Weevil Circle, Rucker Boulevard and the College Street corridor, plus everything around the Boll Weevil Monument, Fort Rucker just east and the Enterprise State Community College campus.
We also cover the nearby Coffee County and the Wiregrass communities listed further down this page.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895Door lock repair in Enterprise: questions we get asked
Can you rekey my locks instead of replacing them?
Yes, as long as the cylinders are in serviceable condition. Rekeying keeps the hardware you already have, makes every old key useless, and costs far less than new locksets on every door.
My deadbolt only locks if I lift the door. Is the lock broken?
Probably not. That is the classic sign the door has dropped on its hinges or the frame has shifted, so the bolt is hitting the strike plate instead of entering it. In Enterprise we see this constantly, and the fix is usually hinge and strike work rather than new hardware.
Should I use a single or double cylinder deadbolt?
A double cylinder needs a key on both sides, which stops someone reaching through broken glass but also slows down anyone trying to get out in an emergency. For most Enterprise homes with glass near the door, we would rather reinforce the glass and the frame and keep a single cylinder inside.
Do you install smart locks?
Yes, and more importantly we fix the door so they work. Motorized deadbolts have far less torque than your wrist does, so a strike that a manual bolt could force is exactly what makes a smart lock report a jam every other day.
The lock is fine but the door will not stay shut. What is happening?
The latch is not fully engaging the strike, so the door rests closed but is not actually latched. That is an alignment fix and it is worth doing quickly, because a door in that state offers almost no security.
A key broke off in my lock. Can it be saved?
Usually. We extract the broken piece and check the cylinder, but the reason keys break is that the lock was already stiff, so we look at what caused that rather than just handing back a new key.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895Other door repair services in Enterprise
- Sliding Door Repair Enterprise
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Frame Repair Enterprise
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Enterprise
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Enterprise
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Enterprise
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Enterprise
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Enterprise
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Enterprise
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Door Closer Repair Enterprise
Closers adjusted, rebuilt and replaced so doors shut properly instead of slamming or hanging open.
- Automatic Door Repair Enterprise
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Enterprise
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Enterprise
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Enterprise
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Enterprise
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Enterprise
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Door Lock Repair near Enterprise
We cover the surrounding Coffee County and the Wiregrass communities as well:
- Door Lock Repair in Elba
- Door Lock Repair in New Brockton
- Door Lock Repair in Greenville
- Door Lock Repair in Georgiana
- Door Lock Repair in Luverne
- Door Lock Repair in Evergreen
- Door Lock Repair in Troy
- Door Lock Repair in Brundidge
All door repair services in Enterprise · Door Lock Repair across Alabama · All Alabama service areas
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895