Most of our Enterprise calls come from Downtown Enterprise and the Boll Weevil Circle, though we work the whole Coffee County side of it and get out to Elba regularly.
A lot of what we see in Coffee County comes down to age. Houses built decades ago have solid frames with tired hardware; houses built recently have sound hardware in frames that are still settling.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Common sliding door repair faults in Coffee County
These are the sliding door repair faults we are called out to most often in Enterprise. If you recognise one, the underlying cause is usually the second half of the line.
- The door will not latch anymoreThe panel has settled out of square, so the hook or mortise latch no longer lines up with the keeper.
- The door stops short of the jamb by half an inchDebris packed at the end of the track, or an adjuster screw wound fully out.
- The interlock at the meeting stile has separatedThe panel has dropped far enough that the stiles no longer engage each other.
- A loud grinding or scraping noiseMetal-on-metal contact where the roller housing has broken through and is riding on the bare track.
- You can lift the panel visibly in its openingExcess head clearance from a sagging header, which is what lets it jump the track.
- It slides fine one way and binds the otherOne roller of the tandem pair has collapsed, so the panel is running out of level.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895What Enterprise weather does to sliding door repair
Sandy soil here drains fast but also shifts, and blowing sand is a constant presence in sliding door tracks and screen channels.
Storm wind pushes hard on the large flat surface of a patio slider and drives the panel against the interlock, which loosens roller adjustment over time and works the panel out of alignment with its latch keeper.
Sun loading on a west-facing patio slider expands the aluminum frame through the afternoon and degrades the vinyl weatherstrip and the glazing gaskets, so the door that slides fine at nine in the morning is tight by four.
It is why the same repair done properly in Enterprise lasts, and the same repair done cheaply does not.
Local factors we account for in Enterprise: storm wind and sun and heat load — typical of the Wiregrass.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895What a sliding door repair call covers
- Latch and keeper repairRebuilding or replacing mortise latches, hook latches and strike keepers.
- Roller replacementTandem steel or nylon roller assemblies matched to the door manufacturer and panel weight.
- Handle set replacementInterior and exterior pulls, including keyed exterior handle sets.
- Anti-lift and security hardwareTrack locks, foot bolts and anti-lift blocks fitted to the panel.
- Frame squaringShimming and refastening frames that have shifted out of square.
- Weep hole clearingOpening blocked sill drainage so the track sheds water instead of holding it.
- Track repair and cappingStainless track caps installed over worn aluminum so the new rollers ride on a fresh surface.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895What happens when we get there
- Watch it move before touching anythingWe run the door end to end and listen. Where the noise starts and where the effort peaks tells us which roller has gone.
- Lift the panel out and inspect itThe wheels come off the housings and get checked for flat spots, seized bearings and housings that have been running on bare metal.
- Match rollers to the door, not the cataloguePanel weight, housing type and track profile all decide the roller. Fitting whatever is on the van is why doors come back.
- Restore the running surfaceWorn track gets repaired or capped so the new rollers are not immediately damaged by the old groove.
- Set it so the lock works without liftingThe height is right when the latch engages with the door simply pushed closed. Anything you have to lift is still misadjusted.
- Test it the way you use itWe run the door dozens of times, check the lock engagement, and make sure it moves with one hand. We look at how much sand is reaching the opening, since sometimes a sweep or a threshold change does more good than new hardware.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895What affects the cost of sliding door repair in Enterprise
We would rather tell you what drives the price than quote a number that turns out to be wrong once we see the door. On a sliding door repair job in Enterprise, the main variables are these:
- how much damage the worn track has taken before the call
- the size and weight of the panel, since heavy insulated glass units need heavier assemblies
- how many panels the system has, since three and four panel doors take longer to set
- whether the frame has moved and needs shimming or refastening
- the age of the door and whether replacement hardware is still made for it
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Enterprise.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Areas we cover for sliding door repair in Enterprise
Our Enterprise service area includes Downtown Enterprise, the Boll Weevil Circle, Rucker Boulevard and the College Street corridor and the surrounding Coffee County communities, out around the Boll Weevil Monument, Fort Rucker just east and the Enterprise State Community College campus.
We also cover the nearby Coffee County and the Wiregrass communities listed further down this page.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895Sliding door repair in Enterprise: questions we get asked
Do you replace the glass in sliding doors too?
Yes. Fogged units where the insulated seal has failed, cracked panes and full tempered glass replacement are all part of what we do, and we can usually keep the existing frame.
Can you fix the lock without fixing the door?
Sometimes, but if the door has settled, a new lock will not line up with the keeper any better than the old one did. We check the panel alignment first, because a lock that will not catch is often a symptom rather than the actual problem.
Do you charge to come look at it?
We talk through the symptoms on the phone first, because a lot of sliding door problems can be narrowed down from a good description and a photo of the bottom rail. Call and we will tell you what we think is going on and what it takes to fix.
Do you work on the big multi-panel and stacking patio doors?
Yes. Those systems put a lot of weight on each roller and they are less forgiving of a frame that is even slightly out of square, so alignment work matters more on them than on a standard two-panel door.
My door came off the track. Did I break something?
Usually not. A panel comes out of the track when it has dropped low enough that the head channel no longer holds it, which means the rollers were already worn or the adjustment screws backed out. Putting it back without correcting the height means it will happen again.
Why does my sliding door work fine in winter and stick in summer?
That is a moisture and expansion problem, and it is common across Coffee County. Humid months swell wood and vinyl components and expand the frame slightly, which is enough to close up clearance that was already marginal because of worn rollers.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Other door repair services in Enterprise
- Door Lock Repair Enterprise
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Enterprise
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Enterprise
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Enterprise
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Enterprise
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Enterprise
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Enterprise
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Enterprise
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Door Closer Repair Enterprise
Closers adjusted, rebuilt and replaced so doors shut properly instead of slamming or hanging open.
- Automatic Door Repair Enterprise
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Enterprise
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Enterprise
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Enterprise
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Enterprise
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Enterprise
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Sliding Door Repair near Enterprise
We cover the surrounding Coffee County and the Wiregrass communities as well:
- Sliding Door Repair in Elba
- Sliding Door Repair in New Brockton
- Sliding Door Repair in Greenville
- Sliding Door Repair in Georgiana
- Sliding Door Repair in Luverne
- Sliding Door Repair in Evergreen
- Sliding Door Repair in Troy
- Sliding Door Repair in Brundidge
All door repair services in Enterprise · Sliding Door Repair across Alabama · All Alabama service areas
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895