Whether you are near Oak Mountain State Park, over in Oak Mountain, or on the the Cahaba Valley Road corridor side of Pelham, it is the same coverage and the same crew.
A lot of what we see in Shelby County comes down to age. Houses built decades ago have solid frames with tired hardware; houses built recently have sound hardware in frames that are still settling.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895Common sliding door repair faults in Shelby County
These are the sliding door repair faults we are called out to most often in Pelham. If you recognise one, the underlying cause is usually the second half of the line.
- It slides fine one way and binds the otherOne roller of the tandem pair has collapsed, so the panel is running out of level.
- The interlock at the meeting stile has separatedThe panel has dropped far enough that the stiles no longer engage each other.
- Condensation between the glass panesFailed insulated glass seal in the panel; the glass unit itself needs replacement.
- The door stops short of the jamb by half an inchDebris packed at the end of the track, or an adjuster screw wound fully out.
- The screen door falls out constantlyWorn screen rollers and a bent top or bottom rail on the screen frame.
- The lock will not engage without lifting the doorClassic sign the panel has dropped and needs re-shimming, not a new lock.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895How conditions in Pelham affect sliding door repair
Two storm seasons a year, spring and late fall, push water and debris against exterior doors across the metro.
Dust and grit settle into the bottom track constantly and get packed under the rollers, and once that layer is compacted a vacuum will not lift it and the wheels are riding on abrasive rather than on aluminum.
Storm wind pushes hard on the large flat surface of a patio slider and drives the panel against the interlock, which loosens roller adjustment over time and works the panel out of alignment with its latch keeper.
We see the pattern often enough across Shelby County that we usually know what we are looking at before we arrive.
Local factors we account for in Pelham: grit and dust and storm wind — typical of the Birmingham metro.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895What a sliding door repair call covers
- Weep hole clearingOpening blocked sill drainage so the track sheds water instead of holding it.
- Multi-panel and pocket door serviceAlignment and hardware work on stacking and pocketing patio systems.
- Anti-lift and security hardwareTrack locks, foot bolts and anti-lift blocks fitted to the panel.
- Roller replacementTandem steel or nylon roller assemblies matched to the door manufacturer and panel weight.
- Frame squaringShimming and refastening frames that have shifted out of square.
- Panel realignmentRe-plumbing and adjusting the panel so it latches and seals across the full height.
- Latch and keeper repairRebuilding or replacing mortise latches, hook latches and strike keepers.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895How we approach sliding door repair
- Start with the openingBefore the panel comes out we check the header for deflection and the sill for level, because a door cannot run true in an opening that is not.
- Pull and inspect the panelThe panel comes out so we can see the roller housings, the bottom rail and the condition of the track underneath. We flush the running surfaces properly on metro jobs rather than just wiping them, since fine clay packs into places a cloth will not reach.
- Match the hardwareSliding door rollers are not universal. We identify the manufacturer and panel weight and fit the right tandem assembly rather than the closest thing on the truck.
- Bring the running surface backA pitted or peened track will destroy new rollers in a season, so it gets dressed, capped or replaced before anything goes back in.
- Set and adjustThe panel goes back in, gets plumbed, and the roller height is set so the door latches and seals along its whole edge.
- Test it the way you use itWe run the door dozens of times, check the lock engagement, and make sure it moves with one hand.
Need it looked at soon?Call and we will tell you honestly when we can get there.
Click to Call (205) 619-2895What affects the cost of sliding door repair in Pelham
There is no single price for sliding door repair in Pelham, because two doors with identical symptoms can need very different work. Here is what makes the difference:
- how much damage the worn track has taken before the call
- whether the fix is rollers only or rollers plus track repair
- whether the frame has moved and needs shimming or refastening
- the age of the door and whether replacement hardware is still made for it
- the size and weight of the panel, since heavy insulated glass units need heavier assemblies
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Pelham.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Areas we cover for sliding door repair in Pelham
Pelham coverage runs across Oak Mountain, the Cahaba Valley Road corridor, Ballantrae and the US-31 corridor, and out to the areas around Oak Mountain State Park, the Pelham Civic Complex and Ballantrae Golf Club.
We also cover the nearby Shelby County and the Birmingham metro communities listed further down this page.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895Sliding door repair in Pelham: questions we get asked
Do you replace the glass in sliding doors too?
Yes. Fogged units where the insulated seal has failed, cracked panes and full tempered glass replacement are all part of what we do, and we can usually keep the existing frame.
My door came off the track. Did I break something?
Usually not. A panel comes out of the track when it has dropped low enough that the head channel no longer holds it, which means the rollers were already worn or the adjustment screws backed out. Putting it back without correcting the height means it will happen again.
Do you repair the older aluminum sliding doors?
Yes, and there are a lot of them in Pelham. Aluminum frames from the sixties through the eighties are actually good candidates for repair because the frame material has not degraded; it is the rollers, the track surface and the weatherstrip that have worn out.
Will new rollers fix a door that scrapes loudly?
Only if the track is still in good condition. Once a roller has broken through and the housing has been riding on bare aluminum, the track has a groove worn in it, and new rollers dropped onto that groove will fail quickly. That is when we cap the track.
Why does my sliding door work fine in winter and stick in summer?
That is a moisture and expansion problem, and it is common across Shelby County. Humid months swell wood and vinyl components and expand the frame slightly, which is enough to close up clearance that was already marginal because of worn rollers.
Do you charge to come look at it?
We talk through the symptoms on the phone first, because a lot of sliding door problems can be narrowed down from a good description and a photo of the bottom rail. Call and we will tell you what we think is going on and what it takes to fix.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895Other door repair services in Pelham
- Door Lock Repair Pelham
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Pelham
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Pelham
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Pelham
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Pelham
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Pelham
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Pelham
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Pelham
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Door Closer Repair Pelham
Closers adjusted, rebuilt and replaced so doors shut properly instead of slamming or hanging open.
- Automatic Door Repair Pelham
Automatic sliding and swing doors, operators, sensors and safety systems serviced.
- Screen Door Repair Pelham
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Pelham
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Pelham
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Pelham
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Pelham
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Sliding Door Repair near Pelham
We cover the surrounding Shelby County and the Birmingham metro communities as well:
- Sliding Door Repair in Alabaster
- Sliding Door Repair in Helena
- Sliding Door Repair in Calera
- Sliding Door Repair in Chelsea
- Sliding Door Repair in Columbiana
- Sliding Door Repair in Montevallo
- Sliding Door Repair in Wilsonville
- Sliding Door Repair in Harpersville
All door repair services in Pelham · Sliding Door Repair across Alabama · All Alabama service areas
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895