Alabama Sliding Door Repair Statewide door & window repair Click to Call (205) 619-2895
Home Alabama Remlap Screen Door Repair

Remlap, Alabama · Blount County

Screen Door Repair in Remlap, AL

Screen doors get treated as disposable, which is a shame because most of what fails on them costs very little to fix. Mesh, spline, rollers and corner keys are all replaceable, and the frame is usually fine.

  • Repair first, replace last
  • Homes & businesses
  • Blount County covered
  • Straight answers on the phone

Click to Call (205) 619-2895

Screen Door Repair diagram
Screen Door Repair — Remlap, Alabama

We service every part of Remlap, including the AL-75 corridor and the Locust Fork of the Black Warrior, and the nearby Blount County towns like Oneonta and Cleveland.

Remlap has enough older housing stock that repair almost always beats replacement here, and enough new construction that we spend a lot of time on hardware that failed early.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

When to call about screen door repair

These are the screen door repair faults we are called out to most often in Remlap. If you recognise one, the underlying cause is usually the second half of the line.

  • The mesh is torn or has holesStraightforward rescreen, and worth doing before the tear spreads.
  • A retractable screen will not fully retractA fouled or fatigued spring cassette, or debris in the guide channel.
  • It takes real effort to slideSeized rollers or a track full of packed debris.
  • The screen door falls out of the trackWorn screen rollers or a bent top rail that no longer holds the panel in the head channel.
  • Sun damage has made the mesh brittleUV degradation, common on south and west facing doors.
  • The storm door blew open and bent the armNo wind chain fitted, or a failed hold-open washer on the closer.

Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.

Click to Call (205) 619-2895

What we see on screen door repair around Blount County

Snow and sleet are more common here than almost anywhere else in Alabama, and meltwater refreezing in a sliding door track is a recurring winter problem.

Ice in the screen track jams the panel, and forcing a screen door out of frozen track is the most common way people bend a screen frame past the point of straightening.

Cold makes screen spline brittle and it shrinks in the channel, which is why mesh often comes loose along one edge after a hard winter even though nothing touched it.

We factor that in on every screen door repair job around Straight Mountain and the rest of Remlap.

Local factors we account for in Remlap: ice and sleet and winter freezes — typical of the Sand Mountain and Lookout Mountain plateau.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

What a screen door repair call covers

  • Screen enclosure and porch panel repairRescreening porch and patio enclosure panels.
  • Screen track repairRepairing or replacing the channel the screen rides in.
  • Screen roller replacementNew rollers and adjusters so a sliding screen tracks properly and stays in.
  • Handle and latch replacementNew pulls and latches on screen and storm doors.
  • RescreeningNew mesh and spline in standard fiberglass, pet-resistant, solar or fine no-see-um mesh.
  • Pet mesh and pet grille installationHeavy-duty mesh and lower grilles for doors that dogs push against.
  • Sliding screen replacementCustom-built replacement screen panels where the original is beyond repair.

Get a real diagnosis, not a sales pitch.We fix doors for a living.

Click to Call (205) 619-2895

How a Remlap screen door repair visit works

  1. Work out whether it is the screen or the trackA screen that jams is often a track problem. Replacing rollers in a damaged track fixes nothing.
  2. Check the frame for squareA racked frame will never slide properly. Corner keys get reset before anything else is considered. Plateau jobs get seals and lubricants rated for freezing temperatures, since standard products stiffen and stop working when it matters.
  3. Match the mesh to the exposureOn a sun-facing opening, standard fibreglass will be brittle within a couple of seasons, so we specify accordingly.
  4. Rescreen with correct tensionEven tension and properly seated spline so the mesh does not sag or pull out of the channel.
  5. Fit and adjust the rollersBoth rollers set so the frame runs level and the latch meets its keeper without lifting.
  6. Test the full travelThe door should move with one finger, latch cleanly and stay in the track.

Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.

Click to Call (205) 619-2895

What affects the cost of screen door repair in Remlap

Pricing on screen door repair depends on what has actually failed, which is why we talk it through before quoting. These are the things that move the number:

  • custom-built replacement panels where the original is not repairable
  • storm door hardware such as closers and latches
  • roller and track work in addition to the screen itself
  • the mesh type chosen, from standard fiberglass to pet-resistant and solar
  • rescreening versus repairing or replacing the frame

Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Remlap.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

Areas we cover for screen door repair in Remlap

If you are in the AL-75 corridor, or anywhere near Straight Mountain and the Blackburn Fork, we cover you.

Service area: Remlap, Blount County, Alabama — and the surrounding communities.

We also cover the nearby Blount County and the Sand Mountain and Lookout Mountain plateau communities listed further down this page.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

Screen door repair in Remlap: questions we get asked

How long does a rescreen take?

Usually under an hour per panel in Remlap. If the frame needs straightening or corner keys replaced, allow a bit longer.

Can a bent screen frame be straightened?

Sometimes. Light aluminum frames can often be brought back to square, but a badly racked frame is usually better replaced, and a custom panel is not expensive.

My screen mesh has gone brittle and crumbles. What happened?

UV exposure. Screens on the south and west sides of a house in Remlap take a lot of sun, and standard fiberglass mesh eventually degrades. Solar mesh lasts longer and cuts heat at the same time.

My storm door blew open and broke. Can it be repaired?

Usually yes: the closer and its mounting take the damage. We repair the mounting and fit a wind chain so the next gust does not do the same thing.

Can you make a screen that keeps out the tiny biting insects?

Yes, fine no-see-um mesh. It has a much tighter weave, and in the parts of Blount County near water it is the only thing that actually works against the smallest biters.

Do you make custom-size screens?

Yes. Older openings in Remlap are rarely a stock size, and building a panel to the actual measured opening is the only way to get one that fits and stays in.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

Other door repair services in Remlap


Screen Door Repair near Remlap

We cover the surrounding Blount County and the Sand Mountain and Lookout Mountain plateau communities as well:

All door repair services in Remlap  ·  Screen Door Repair across Alabama  ·  All Alabama service areas

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895
Click to Call (205) 619-2895Tap to speak to a door repair tech now