Our Selma customers are spread from Downtown Selma to Old Town Historic District and out around the Edmund Pettus Bridge, and we serve the surrounding Dallas County communities on the same schedule.
Between the established parts of Selma and the newer subdivisions, we see two different kinds of failure: worn-out frames on one side of town and worn-out hardware on the other.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895The automatic door repair problems we see most in Selma
These are the automatic door repair faults we are called out to most often in Selma. If you recognise one, the underlying cause is usually the second half of the line.
- The belt has visible cracking on the toothed faceAge and UV exposure, and it will strand the door when it goes.
- Uneven gap between bi-parting panelsCarriers or belt out of adjustment.
- The door will not open when someone approachesFailed or misaligned activation sensor, or a controller fault.
- The swing operator has stopped and the door is dead weightOperator or power failure; the door needs to be made safe manually.
- The door is slow or jerkyWorn rollers, a loose belt, or a controller setting problem.
- The door has become noticeably louder over a few weeksBearing wear in the carriers or motor, which is the warning stage before a failure.
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895How conditions in Selma affect automatic door repair
The wet winter and dry late-summer cycle here is severe enough that a door adjusted perfectly in February can bind badly by September.
Rain on the sensing field of a motion activation sensor causes doors that open at nothing, and water in a header does long-term damage to the operator electronics.
Building movement puts an automatic door header out of level, and these systems have very little tolerance for that, so a door that has started binding at one end of its travel is often reporting the building rather than the door.
Knowing that is the difference between a repair that holds through a Selma summer and one that does not.
Local factors we account for in Selma: heavy rainfall and soil movement — typical of the Black Belt.
Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.
Click to Call (205) 619-2895Our automatic door repair services in Selma
- Controller and board replacementReplacing failed control boards and reprogramming operating parameters.
- Weatherstrip and sweep replacementSealing automatic entrances against air and water infiltration.
- Emergency manual securingSafely securing a failed automatic door so a building can be locked.
- Operator repairServicing sliding and swing operators, motors, belts and controllers.
- Carrier and track serviceReplacing worn carriers and rollers and correcting track alignment.
- Locking and access integrationAutomatic door locks, access control and after-hours locking.
- Breakout hardware serviceMaking sure emergency breakout panels operate as designed.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895How a Selma automatic door repair visit works
- Establish whether it is safe to runSome faults are a nuisance and some are a hazard. We decide which this is before the door goes back into service.
- Separate mechanical from electronicWe check the door by hand with the operator disengaged, because a door that binds mechanically will defeat any amount of controller adjustment. On prairie clay we look at the whole opening for racking, because a door here is usually reporting a foundation movement rather than a hardware fault.
- Map the detection patternSensors get walk-tested from every approach angle, because a door that works for staff can fail for a child or a wheelchair user.
- Repair and adjustBelts, carriers, bearings, sensor heads and controller settings, depending on what the diagnosis actually found.
- Verify against the safety standardDetection, hold-open time and force are checked, not assumed.
- Show you the fault conditionIf it is intermittent, we show you what to look for so the next occurrence gets reported usefully.
Broken, stuck, or will not lock?Talk to someone who works on these every day.
Click to Call (205) 619-2895What affects the cost of automatic door repair in Selma
There is no single price for automatic door repair in Selma, because two doors with identical symptoms can need very different work. Here is what makes the difference:
- sensor and adjustment work versus operator or controller replacement
- the age of the system and whether parts are still supported
- access control and locking integration
- the number of openings on a maintenance schedule
- emergency or after-hours response
Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Selma.
Get a real diagnosis, not a sales pitch.We fix doors for a living.
Click to Call (205) 619-2895Areas we cover for automatic door repair in Selma
Coverage in Selma takes in Downtown Selma, Old Town Historic District, Broad Street and the Highland Avenue corridor, plus everything around the Edmund Pettus Bridge, the Old Town Historic District and the Alabama River.
We also cover the nearby Dallas County and the Black Belt communities listed further down this page.
One call gets you an answer.We will tell you what is wrong and what it takes to fix.
Click to Call (205) 619-2895Automatic door repair in Selma: questions we get asked
Can an automatic door be secured if the operator fails?
Yes. A failed operator does not mean an unsecured building. We can make the door safe and lockable manually while parts are on order.
Can you upgrade an old operator to a newer system?
Often yes, and it is worth considering when parts for the existing controller are no longer supported. We will tell you when a system has genuinely reached that point.
Our automatic door closed on a customer. What do we do?
Stop using it in automatic mode and call. A safety sensor failure on an automatic door is the one problem that should never wait, and in a Selma business it is a real liability exposure as well as a safety issue.
Do you work on ADA push-plate doors?
Yes. Low-energy operators on accessible entrances are common in Selma clinics, offices and public buildings, and they need both mechanical and adjustment work to keep meeting requirements.
Do you provide service agreements for automatic doors?
Yes. For Selma businesses with automatic entrances, scheduled service costs less than emergency calls and keeps the safety checks documented.
What is a breakout panel and why does it matter?
It lets the sliding panels swing outward in an emergency so people can get out even if the door is not operating. If the breakout hardware is stiff or has been disabled, that is a serious egress problem.
Not sure whether it is a repair or a replacement?Describe the symptoms and we will give you a straight answer.
Click to Call (205) 619-2895Other door repair services in Selma
- Sliding Door Repair Selma
Sticking, jumping, or dragging sliding glass doors put back on smooth-rolling track.
- Door Lock Repair Selma
Deadbolts, latches, cylinders and strike alignment repaired on residential and commercial doors.
- Door Frame Repair Selma
Rotted, split, kicked-in and out-of-square frames rebuilt so the door fits again.
- Door Handle Repair Selma
Loose, broken and seized handles, knobs and levers repaired or replaced.
- Door Hinge Repair Selma
Sagging doors, stripped hinge screws, squealing pins and worn knuckles put right.
- Patio Door Repair Selma
Sliding, French and multi-panel patio doors repaired, realigned and resealed.
- Door Glass Repair Selma
Broken, cracked and fogged door glass replaced, including tempered and insulated units.
- Commercial Door Repair Selma
Hollow metal, aluminum and high-traffic doors kept working for businesses and property managers.
- Storefront Door Repair Selma
Aluminum storefront entrances repaired: pivots, closers, locks, glass and alignment.
- Door Closer Repair Selma
Closers adjusted, rebuilt and replaced so doors shut properly instead of slamming or hanging open.
- Screen Door Repair Selma
Sliding screens, storm doors and screen panels rescreened, rerolled and rehung.
- French Door Repair Selma
Sagging, dragging and drafty French doors realigned, resealed and rehung.
- Interior Door Repair Selma
Sticking, sagging, rattling and damaged interior doors made to work properly again.
- Exterior Door Repair Selma
Front and back entry doors resealed, realigned, reinforced and repaired.
- Window Repair Selma
Sashes, balances, glass, seals and hardware repaired on residential and commercial windows.
Automatic Door Repair near Selma
We cover the surrounding Dallas County and the Black Belt communities as well:
- Automatic Door Repair in Valley Grande
- Automatic Door Repair in Selmont-West Selmont
- Automatic Door Repair in Moundville
- Automatic Door Repair in Livingston
- Automatic Door Repair in York
- Automatic Door Repair in Butler
- Automatic Door Repair in Eutaw
- Automatic Door Repair in Greensboro
All door repair services in Selma · Automatic Door Repair across Alabama · All Alabama service areas
Most doors we see are repairable.Call and find out before you price a replacement.
Click to Call (205) 619-2895